TM 9-2320-260-34-2
16-48. POWER DIVIDER REPAIR (Contd)
b. Cleaning and Inspection
1. For general cleaning instructions, refer to para. 2-8.
2. For general inspection instructions, refer to para. 2-9.
3. Inspect double shifter housing (5), single shifter housing (16), and housing (20) for cracks, breaks,
and wear. Refer to table 16-21, Power Divider and Shifter Housings Wear Limits, for measurements.
Replace housings (5), (16), or (20) if damaged or worn past limits.
Table 16-21. Power Divider and Shifter Housings Wear Limits.
WEAR LIMITS/TOLERANCES
ITEM
lTEM/POINT OF MEASUREMENT
NO.
MILLIMETERS
INCHES
Double shifter housing
5
38.125
1.501
A Shifter shaft bores (4) - maximum
16
Single shifter housing
38.125
1.501
B. Shifter shaft bores - maximum
20
Housing
80.018
3.1503
C. Input shaft bores - maximum
80.018
3.1503
D. Winch shaft bores maximum
72.017
2.8353
E. Pump shaft front bore maximum
80.018
3.1503
F. Pump shaft rear bore - maximum
16-285
