TM 9-2320-260-34-2
16-48. POWER DIVIDER REPAIR (Contd)
NOTE
Mark bracket and housing for installation.
37. Remove four cotter pins (28), slotted nuts (27), and bracket (25) from studs (26) on housing (13).
Discard cotter pins (28).
38. Remove two retaining caps (33), springs (32), and ball bearings (31) from double shifter housing (37).
39. Remove two screws (29), lockwashers (36), and levers (35) from shifter shafts (30) and (34). Discard
lockwashers (36).
40. Remove two screws (38), lockwashers (40), and forks (39) from shifter shafts (30) and (34). Discard
Iockwashers (40).
NOTE
Tag levers and shifter shafts for installation.
41. Remove shifter shafts (30) and (34) from double shifter housing (37).
16-283
