TM 9-2320-260-34-2
16-48. POWER DIVIDER REPAIR (Contd)
14. Press roller bearing (9) into drive gear (10) and position drive gear (10) in housing (6). Coat roller
bearing (9) with gear oil after installation.
15. Install splined end of input shaft (3) through bore (2), input gear thrust washer (11),drive gear (10)
and input gear thrust washer (8).
16. Press bearing (1) on input shaft (3) through bore (7).
17. Install clutch (4) on gear end of input shaft (3) by pushing through bore (2).
18. Install input shaft bearing (5) on input shaft (3) of housing (6).
16-290
