TM 9-2320-240-34-2
16-48. POWER DIVIDER REPAIR (Contd)
7.
Remove four screws (8), lockwashers (9), cover (7), and gasket (6) from housing (10). Discard
lockwashers (9) and gasket (6).
Using brass drift, tap on end (3) of winch shaft (2) and remove winch shaft (2) and winch gear (11)
8.
through opening (4) of housing (10).
9.
Using puller, remove bearing (1) from winch shaft (2).
10.
Remove winch gear (11) from winch shaft (2).
11.
Using puller, remove bearing (5) from winch shaft (2).
12.
Remove plug (15) from adapter (14).
NOTE
Access setscrew through plug opening.
13.
Remove setscrew (18) and coupling (17) from pump shaft (21).
14,
Remove six screws (13), Iockwashers (12), adapter (14), and gasket (16) from housing (10). Discard
Iockwashers (12) and gasket (16).
Remove seal (19) from adapter (14). Discard seal (19).
15.
Remove woodruff key (22) from pump shaft (21). Discard woodruff key (22).
16.
Remove seal (20) from housing (10). Discard seal (20).
17.
16-280
