TM 9-2320-260-34-2
16-48. POWER DIVIDER REPAIR
THIS TASK COVERS:
a. Disassembly
c. Assembly
b. Cleaning and Inspection
INITIAL SETUP
APPLICABLE MODELS
MATERIALS/PARTS (Contd)
M816
Gasket (Appendix D, Item 68)
Gasket (Appendix D, Item 66)
TOOLS
Four seals (Appendix D, Item 438)
General mechanic's tool kit
Three seals (Appendix D, Item 437)
(Appendix B, Item 1)
Seal (Appendix D, Item 439)
Mechanical puller kit (Appendix B, Item 14)
Seal (Appendix D, Item 440)
Dial indicator (Appendix B, Item 11)
Four cotter pins (Appendix D, Item 39)
Inside micrometer (Appendix B, Item 9)
Woodruff key (Appendix D, Item 559)
Outside micrometer (Appendix B, Item 8)
Pin (Appendix D, Item 317)
Two expansion plugs (Appendix D, Item 330)
MATERIALS/PARTS
Gear oil (Appendix C, Item 22)
Forty-two lockwashers (Appendix D, Item 215)
REFERENCES (TM)
Three Iockwashers (Appendix D, Item 223)
Three Iockwashers (Appendix D, Item 252)
TM 9-2320-260-34P-2
Four gaskets (Appendix D, Item 66)
EQUIPMENT CONDITION
Two gaskets (Appendix D, Item 68)
Gasket (Appendix D, Item 74)
Power divider removed (para. 16-47).
Gasket (Appendix D, Item 70)
1. Remove four screws (4), lockwashers (3), shifter housing (2), and gasket (1) from housing (5). Discard
lockwashers (3) and gasket (1).
2. Remove eight screws (7), Iockwashers (6), double shifter housing (8), and gasket (9) from housing (5).
Discard lockwashers (6) and gasket (9).
16-278
