TM 9-2320-260-34-2
16-47. POWER DIVIDER AND DRIVE REPLACEMENT (Contd)
Remove lifting device from hook (2) of power divider (3).
8.
Install cover (5) on tool box floor (4) with four new lockwashers (6) and screws (1).
9.
Perform steps 10 through 14 if new power divider is installed.
Wrap male threads on elbow (10) and adapter (14) with antiseize tape.
10.
Remove two screws (16) and lockwashers (17) from power divider (3). Discard lockwashers (17).
11.
Install bracket (18) on power divider (3) with two new lockwashers (17) and screws (16).
12.
Install elbow (10) and adapter (14) on air valve (15).
13.
Install two spacers (8) and air valve (15) on bracket (18) with two screws (7) and new locknuts (9).
14.
Install two new sleeves (11) and air lines (12) and (13) on elbow (10) and adapter (14).
15.
16-276
