TM 9-2320-260-34-1
3-26. PREPARING REPLACEMENT ENGINE FOR INSTALLATION
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-20
TM 9-2320-260-34P-1
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit
Engine and transmission removed (para. 3-24),
(Appendix B, Item 1)
Transmission removed (para. 8-5).
MATERIALS/PARTS
Upper and lower radiator hoses removed
Four insulators (Appendix D, Item 162)
(TM 9-2320-260-20).
Antiseize tape (Appendix C, Item 50)
Cap and plug set (Appendix C, Item 6)
CAUTION
Cap or plug all openings immediately after disconnecting lines
and hoses to prevent contamination. Remove cap or plugs prior to
installation. Failure to do so may result in damage to equipment.
NOTE
Perform this task when preparing removed engine for installation
into container.
1. Remove shutoff valve (2) and adapter (3) from water manifold (1).
2. Remove water temperature sending unit (4) from water manifold (1).
