TM 9-2320-260-34-1
3-25. ENGINE AND CONTAINER REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
PERSONNEL REQUIRED
All
Two
TOOLS
REFERENCES (TM)
General mechanic's tool kit
TM 9-2320-260-34P-1
(Appendix B, Item 1)
GENERAL SAFETY INSTRUCTIONS
Chain
Engine container pressure must be released before
Lifting device
opening container.
Torque wrench, 3/8-in. dr.
All personnel must stand clear during lifting
(Appendix B, Item 4)
operations.
MATERIALS/PARTS
Lifting device must have a weight capacity greater
Forty-four lockwashers
than engine.
(Appendix D, Item 215)
WARNING
Engine container is pressurized. Ensure pressure is released
before opening container. Failure to do so may result in injury to
personnel.
a. Removal
1.
Remove forty-two nuts (2), lockwashers (3), screws (4), and upper container section (1) from lower
container section (5). Discard lockwashers (3).
NOTE
Perform step 2 for late model vehicles.
2. Loosen two hose clamps (7) and remove breather tube (6) from breather (8) and elbow (9).
