TM 9-2320-260-34-1
3-25. ENGINE AND CONTAINER REPLACEMENT (Contd)
NOTE
Perform step 6 for late model engines.
6. Install breather tube (1) on breather (3) and elbow (4). Tighten two hose clamps (2).
7. Install engine flywheel housing (6) on two rear trunnion mounts (7) with two washers (8), new
lockwashers (9), and screws (5).
8. Install trunnion cap (13) on engine (11) and front trunnion mount (12) with two washers (14) and
screws (10).
9. Install upper container section (15) on lower container section (19) with forty-two screws (18), new
lockwashers (17), and nuts (16). Tighten nuts (16) 85-105 lb-ft (115-142
3-100
