TM 9-2320-260-34-1
3-25. ENGINE AND CONTAINER REPLACEMENT (Contd)
3. Remove two screws (1), washers (5), and trunnion cap (4) from front trunnion mount (3) and
engine (2).
4. Remove two screws (6), lockwashers (10), and washers (9) from two rear trunnion mounts (8) and
5. Attach chain to lifting device and two engine lifting brackets (11).
WARNIN6
All personnel must stand clear during lifting operations.
A swinging or shifting load may cause injury to personnel.
Lifting device must have a weight capacity greater than 4500 lbs.
(2043 kg). Failure to do so may cause injury to personnel and/or
damage to equipment.
NOTE
Assistant will help with steps 6 through 8.
6. Raise lifting device until all slack is removed from chain.
7. Remove engine (2) from lower container section (12).
8. Lift engine (2) onto transport stand.
9. Remove lifting device and chain from two engine lifting brackets (11).
b. Installation
NOTE
1. Attach chain to lifting device and two engine lifting brackets (11).
WARNIN6
All personnel must stand clear during lifting operations.
A swinging or shifting load may cause injury to personnel.
Lifting device must have a weight capacity greater than 4500 lbs.
(2043 kg). Failure to do so may cause injury to personnel and/or
damage to equipment.
NOTE
Assistant will help with steps 2 through 4.
2. Raise lifting device until all slack is removed from chain.
3. Lift engine (2) from transport stand.
4. Install engine (2) in lower container section (12), ensuring all mounting holes are alined.
5. Remove lifting device and chain from two engine lifting brackets (11).
3-98