TM 9-2320-211-20
Figure 2-248. Removing or
installing wiring harness--wrecker models.
a. Removal.
(1) D i s c o n n e c t t h e b a y o n e t t y p e c o n n e c t o r
securing the brake lock cable to the harness.
Separate the cable and harness.
(2) Unscrew the two sleeve nuts securing the
brake hydraulic lines to the front and rear of the
b r a k e lock. Remove the lines from the lock.
(3) Remove the safety nut and capscrew
securing the brake lock to the inside of the frame
left side rail, and remove the lock from the vehicle.
Figure 2-249. Electric brake lock mounted on
frame left side rail.