C3, TM 9-2320-211-20
Figure 2-203. Front wheel alinement.
camber.
the vertical center line through the wheel and tire
c. Turning Angle. The front wheel turning angle is the
assembly away from the vertical center line of the truck.
maximum angle through which the wheels may be turned
There is no adjustment for camber; however, loose wheel
from the straightahead position. This angle is limited by
bearings, loose knuckle trunnion bearings, a bent
the turning stops that are welded after the adjustment.
steering knuckle, or a bent axle housing will affect
d. Toe-in Check (fig. 2-203).
