Figure 2-196.1. Air compressor governor MS53006-1

C3, TM 9-2320-211-20

(2) Unscrew connector securing line from air

compressor to air governor.

(3) Remove T fitting (governor MS53006-1).

(4) Unscrew two screws, and remove air governor.

c. Installation.

(1) Position air governor on right side of cowl,

install two screws, and tighten.

(2) Install T fitting (governor MS53006-1) (fig.

(3) Connect air compressor line to the air governor.

(4) Connect air reservoir-to-governor line and

governor-to-horn line to the air governor.

Figure 2-196. Air compressor governor (8330262) with

air strainer disassembled.

Figure 2-196.1. Air compressor governor MS53006-1.