TM 9-2320-366-20-5
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix
Wrench, Torque 0-200 lb-in. (Item 59, Appendix
Tools and Special Tools
a. Removal.
(1) Remove six screws (1), washers (2), LH defrost cover
(3), and RH defrost cover (4) from vehicle.
(2) Remove two screws (5) and washers (6) from roof
support (7).
(3) Remove two screws (8) and washers (9) from roof
support (7).
(4) Remove roof support (7) from cab roof (10).
Change 1