TM 9-2320-366-20-5
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
a. Removal.
(1)
Fold back of center seat (1) down and slide fully
forward.
NOTE
Perform step (2) on vehicles with cabs S/N
12075G or lower. Cab S/N located on B pillar.
(2)
Remove two screws (2) and washers (3) from seat
mount (4).
NOTE
Perform step (3) on vehicles with cabs S/N
12076G or higher.
(3)
Remove two screws (2), washers (3), and
spacers (4.1) from seat mount (4).
Discard spacers.
Change 2