TM 9-2320-366-20-5
21-5. MACHINE GUN RING CENTER SEAT REPLACEMENT (CONT)
b. Installation.
WARNING
Adhesive
Sealant
can
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water and get immediate medical
attention. Failure to comply may result in
injury to personnel.
(1)
Apply sealing compound to threads of two screws (1).
NOTE
Perform step (2) on vehicles with cabs
S/N 12075G or lower. Cab S/N located on
B pillar.
Install center seat in folded and raised
position with seat rails in the forward
position.
(2)
Position center seat (2) on platform (3).
NOTE
Flat sides of screw will be in line with seat
tracks.
Perform step (3) on vehicles with cabs
S/N 12075G or lower.
(3)
Position washers (4) and screws (1) in seat mount (5).
NOTE
Perform step (4) on vehicles with cabs S/N
12076G or higher.
(4)
Position two spacers (5.1), washers (4), and
screws (1) in seat mounts (5).
(5)
Slide center seat (2) fully forward.
(6)
Fold center seat (2) down
Change 2
