TM 9-2320-366-20-5
b. Installation.
NOTE
All three small arms mounts are installed the
same way. Driver's side shown.
(1) Position weapon support (1) on support (2) with two
washers (3) and screws (4).
(2) Tighten two screws (4) to 36-44 lb-in. (4-5 Nm).
(3) Position storage rack (5) on back wall of cab (6) with two
washers (7) and screws (8).
(4) Tighten two screws (8) to 36-44 lb-in. (4-5 Nm).
End of Task.
21-13/(21-14 Blank)
