TM 9-2320-366-20-5
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools
Engine shut down (TM 9-2320-366-10-1).
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 36, Appendix C)
a. Removal.
NOTE
All three small arms mounts are removed the
same way. Driver's side shown.
(1) Remove two screws (1), washers (2), and storage rack
(3) from back wall of cab (4).
(2) Remove two screws (5), washers (6), and weapon
support (7) from support (8).
