TM 9-2320-366-20-5
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Pin, Cotter (4) (Item 226, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
a. Removal.
(1) Remove four cotter pins (1) and straight pins (2) from
two legs (3). Discard cotter pins.
(2) Remove two quick-release pins (4) from lower platform
(5).
(3) Remove lower platform (5) from cab.
(4) Remove four screws (6), washers (7), and two lanyards
(8) from two brackets (9).
(5) Remove two brackets (9) from cab floor.
(6) Remove four screws (10), washers (11), and two
brackets (12) from cab floor.
21-5
