TM 9-2320-366-20-5
20-43. 200 AMP ALTERNATOR KIT INSTALLATION (CONT)
(100) Position terminal lug TL169 (134) on reverse polarity
relay 24V LOAD terminal (126) with lockwasher (125)
and nut (124).
(101) Position terminal lug TL168 (135) on reverse polarity
relay 24V BAT terminal (127) with lockwasher (125) and
nut (124).
(102) Tighten two nuts (124) to 27-33 lb-ft (37-47 Nm).
(103) Install dust boots (130 and 131) on terminal lugs TL169
(134) and TL168 (135).
NOTE
Perform steps (104) through (131) on
M1093/M1094 only.
(104) Remove self-locking nut (136) and screw (137) from
spare tire retainer (138). Discard self-locking nut.
(105) Remove screw (139) and spring washer (140) from front
lifting beam (86). Discard spring washer.
(106) Position bracket (141) on spare tire retainer (138) with
screw (137) and self-locking nut (136).
(107) Position bracket (141) on front lifting beam (86) with
spring washer (140) and screw (139).
(108) Tighten self-locking nut (136) to 43-51 lb-ft (58-69 Nm).
(109) Tighten screw (139) to 43-51 lb-ft (58-69 Nm).
20-242
Change 1
