TM 9-2320-366-20-5
This task covers:
a. Removal
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Washer, Spring (2) (M1093/M1094) (Item 293,
Spare tire lowered (TM 9-2320-366-20-2).
Cab raised (TM 9-2320-366-10-1).
Terminal, Lug (Item 277, Appendix G)
Terminal, Lug (Item 278, Appendix G)
Nut, Self-Locking (2) (Item 155, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Nut, Self-Locking (3) (all models except
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
M1093/M1094) (Item 156, Appendix G)
Vise, Machinist (Item 48, Appendix C)
Nut, Self-Locking (2) (M1093/M1094) (Item 156,
Caps, Vise Jaw (Item 4, Appendix C)
Nut, Self-Locking (8) (Item 165, Appendix G)
Nut, Self-Locking (Item 142, Appendix G)
Materials/Parts
Ties, Cable, Plastic (Item 69, Appendix D)
Nut, Self-Locking (Item 143, Appendix G)
Lockwasher (2) (Item 72, Appendix G)
Nut, Self-Locking (Item 144, Appendix G)
Lockwasher (2) (Item 73, Appendix G)
Lockwasher (2) (Item 96, Appendix G)
Lockwasher (8) (Item 96, Appendix G)
Lockwasher (Item 103, Appendix G)
Personnel Required
Lockwasher (2) (Item 105, Appendix G)
(2)
a. Removal.
(1) Loosen clamp (1) on air compressor intake hose (2).
(2) Remove air compressor intake hose (2) from intake air
cleaner boot (3).
(3) Loosen clamp (4) on intake air cleaner boot (3).
(4) Remove intake air cleaner boot (3) from intake air
cleaner housing (5).
20-247
