TM 9-2320-366-20-5
(110) Remove self-locking nut (142) and screw (143) from
spare tire retainer (138). Discard self-locking nut.
(111) Remove screw (144) and spring washer (145) from rear
support brace (146). Discard spring washer.
(112) Position bracket (147) on spare tire retainer (138) with
screw (143) and self-locking nut (142).
(113) Position bracket (147) on rear support brace (146) with
spring washer (145) and screw (144).
(114) Tighten self-locking nut (142) to 43-51 lb-ft (58-69 Nm).
(115) Tighten screw (144) to 43-51 lb-ft (58-69 Nm).
NOTE
Position reverse polarity relay 24V terminals
toward front of vehicle.
(116) Position reverse polarity relay (116) on brackets (141
and 147) with two screws (118) and self-locking nuts
(119).
(117) Tighten two self-locking nuts (119) to 25-31 lb-ft (35-43
Nm).
(118) Remove two nuts (120) and lockwashers (121) from
reverse polarity relay 12V BAT terminal (122) and 12V
LOAD terminal (123).
Change 1
20-243
