TM 9-2320-366-20-5
(92) Install dust boot (128) on 12 vdc load cable (84).
(93) Install dust boot (129) on 12 vdc battery cable (85).
(94) Install dust boot (130) on 24 vdc load cable (81).
(95) Install dust boot (131) on 24 vdc battery cable (82).
NOTE
Steps (96) through (101) require the aid of an
assistant.
(96) Position terminal lug TL173 (132) on reverse polarity
relay 12V BAT terminal (122) with lockwasher (121) and
nut (120).
(97) Position terminal lug TL174 (133) on reverse polarity
relay 12V LOAD terminal (123) with lockwasher (121)
and nut (120).
(98) Tighten two nuts (120) to 108-132 lb-in. (13-15 Nm).
(99) Position dust boots (128 and 129) on terminal lugs
TL173 (132) and TL174 (133).
Change 1
20-241
