TM 9-2320-366-20-5
20-43. 200 AMP ALTERNATOR KIT INSTALLATION (CONT)
(86) Connect air filter restriction gauge hose (102) to air flow
sensor (103).
(87) Install connector J106 (98) and dust cap lanyard (100)
on chemical detection unit mounting bracket (101) with
nut (99).
(88) Install dust cap (97) on connector J106 (98).
NOTE
Step (89) requires the aid of an assistant.
(89) Tighten two self-locking nuts (119) to 25-31 lb-ft (35-43
Nm).
(90) Remove two nuts (120) and lockwashers (121) from
reverse polarity relay 12V BAT terminal (122) and 12V
LOAD terminal (123).
(91) Remove two nuts (124) and lockwashers (125) from
reverse polarity relay 24V LOAD terminal (126) and 24V
BAT terminal (127).
20-240
Change 1
