TM 9-2320-366-20-5
(72) Remove screw (107) and washer (108) from resilient
mount (109).
(73) Remove three self-locking nuts (110) and screws (111)
from mounting brackets (112). Discard self-locking nuts.
(74) Remove intake air cleaner housing (113) from mounting
brackets (112) and resilient mount (109).
(75) Cut grommet (114) to 8 1/4 in. (210 mm).
(76) Install grommet (114) in bracket (115).
NOTE
Position reverse polarity relay 24V terminals
toward front of vehicle.
(77) Position reverse polarity relay (116) on brackets (115
and 117) with two screws (118) and self-locking nuts
(119).
20-238