TM 9-2320-366-20-5
19-6. M1089 WRECKER CONTROL PANEL HOSES AND TUBING REPLACEMENT
This task covers:
a. Hydraulic Hose and Tubing Locations
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1)
Crowfoot Attachment, Socket Wrench (Item
Crowfoot Attachment, Socket Wrench (Item
Tools and Special Tools
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
Crowfoot Attachment, Socket Wrench (Item 9, Appendix
Crowfoot Attachment, Socket Wrench (Item 14, Appendix
Oil, Lubricating, OE/HDO 10 (Item 42,
a. Hydraulic Hose and Tubing Locations.
WARNING
Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
Prolonged contact with lubricating oil (MIL-L-2104) may cause a skin rash. Skin and clothing that
come in contact with lubricating oil should be thoroughly washed immediately. Saturated clothing
should be removed immediately. Areas in which lubricating oil is used should be well ventilated
to keep fumes to a minimum. Failure to comply may result in injury to personnel.
CAUTION
Cap or plug hoses, tubes, and connection points to prevent contamination of M1089 wrecker control
panel hydraulic system. Failure to comply may result in damage to equipment.
NOTE
Refer to Table 19-1. M1089 Wrecker Control Panel External Power Hydraulic Hose and Tubing
Locations and Table 19-2. M1089 Wrecker
Control Panel Pressure
and Function Hydraulic Hose
and Tubing Locations for locations of wrecker control panel hydraulic hoses and tubes. It may not be
necessary to remove all hoses and/or tubes at one time.
Tag hoses, tubes, and connection points prior to removal.
Remove plastic cable ties as required.
Remove clamps and support brackets as required.
Position drain pan to collect oil.