TM 9-2320-366-20-5
NOTE
Install plastic cable ties as required.
(4) Position clamp (7) on bracket (8) with bolt (9) and self-
locking nut (10).
(5) Tighten self-locking nut (10) to 84-132 lb-in. (9-15 Nm).
(6) Position hydraulic manifold (11) on tool box (12) with two
spacers (13), spacers (14), and screws (15).
(7) Position two spacers (16) and screws (17) in hydraulic
manifold (11).
(8) Tighten two screws (15) and screws (17) to 18-22 lb-ft
(24-30 Nm).
(9) Close tool box door (18).
g. Follow-On Maintenance.
(1) Raise spare tire (TM 9-2320-366-10-2).
(2) Fill hydraulic system (Appendix H).
(3) Raise cab and check hydraulic manifold for oil leaks (TM
9-2320-366-10-1).
End of Task.
19-21
