TM 9-2320-366-20-5
(7) Remove four screws (24), washer (25), upper
bracket (14), and lower bracket (23) from cab (26).
NOTE
Perform steps (8) through (14) on convex
mirror mounted on clamp.
(8) Remove nut (27), washer (28), convex mirror (29),
and washer (28) from clamp (30).
(9) Remove clamp (30) from mirror arm (31).
NOTE
Left and right cab mirrors are removed the
same way. Left side shown.
(10) Remove two self-locking nuts (32), washers (33),
and cab mirror (34) from mirror arm (31). Discard
self-locking nuts.
18-24.1