TM 9-2320-366-20-5
(10) Position clamp (21) on mirror arm (7).
(11) Install washer (22) and convex mirror (23) with
washer (22) and nut (24).
NOTE
Perform steps (12) through (24) on
vehicles equipped with convex mirrors
mounted with brackets.
Left and right cab mirrors are installed
the same way. Left side shown.
(12) Position upper bracket (25) and lower bracket (26)
on cab (27) with four washers (28) and screws (29).
(13) Tighten four screws (29) to 80-98 lb-in. (9-11 Nm).
(14) Position clip (30) and mirror (31) on lower bracket
(26) with screw (32), washer (33), and self-locking
nut (34).
(15) Tighten self-locking nut (34) to 21-27 lb-ft (28-37
Nm).
Change 2
18-24.5
