TM 9-2320-366-20-5
This task covers:
a.Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Screwdriver Attachment, Socket Wrench (Item
58, Appendix B)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Materials/Parts
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Nut, Self-Locking (2) (Item 167, Appendix G)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Nut, Self-Locking (2) (Item 138, Appendix G)
Socket Set, Socket Wrench (Item 34, Appendix C)
Lockwasher (Item 105.3, Appendix G)
a. Removal.
NOTE
Left and right cab mirrors are removed
the same way. Left side shown.
Perform steps (1) and (7) convex mirror
mounted with bracket.
(1) Remove nut (1), washer (2), convex mirror (3), and
washer (2) from bracket (4).
(2) Remove self-locking nut (5), washer (6), and bracket
(4) from cab mirror (7). Discard self-locking nut.
(3) Remove self-locking nut (8), washer (9), and cab
mirror (7) from mirror arm (10). Discard self-locking
nut.
18-23
