TM 9-2320-366-20-5
(14) Remove four screws (48), washers (49), and
brackets (38 and 47) from cab (50).
b. Installation.
NOTE
Left and right cab mirrors are installed
the same way. Left side shown.
Perform steps (1) through (11) on
vehicles equipped with convex mirrors
mounted with clamps.
(1) Position brackets (1 and 2) on cab (3) with four
washers (4) and screws (5).
(2) Tighten four screws (5) to 80-98 lb-in. (9-11 Nm).
(3) Position clip (6) and mirror arm (7) on lower
bracket (1) with screw (8), washer (9), and self-
locking nut (10).
Change 2
18-24.3
