TM 9-2320-366-20-5
(6) Attach lockwire to bottom end of hose (1).
(7) Pull lockwire and hose (1) through hole at bottom corner
of cab (7).
(8) Remove lockwire from hose (1).
(9) Install grommet (8) on hose (1).
(10) Route hose (1) through cab step mount (9).
(11) Install grommet (8) in cab step mount (9).
(12) Route hose (1) through hole at back of left cab step (10).
(13) Connect hose (1) to windshield washer pump (11).
(14) Install windshield washer reservoir (12) in left cab step
(10).
(15) Connect strap (13) to two brackets (14).
(16) Close cab step tread (15).
18-21