TM 9-2320-366-20-5
(4) Lift windshield washer reservoir (5) partially out of left
cab step (6).
(5) Disconnect hose (7) from windshield washer pump (8).
(6) Pull hose (7) out through hole at back of left cab step
(6).
(7) Remove grommet (9) and hose (7) from cab step mount
(10).
(8) Remove grommet (9) from hose (7). Discard grommet.
(9) Attach a length of lockwire to bottom end of hose (7).
NOTE
All three hoses and connectors are removed
the same way. Center hose and connector
shown.
(10) Disconnect three hoses (7) from three connectors (11).
NOTE
Step (11) requires the aid of an assistant.
(11) Remove three nuts (12) and connectors (11) from cab
(13).
NOTE
Note routing of hoses prior to removal.
(12) Remove three hoses (7) from dashboard (14).
18-19
