TM 9-2320-366-20-5
This task covers:
a.Removal
d. Assembly
b.Disassembly
e. Installation
c. Cleaning/Inspection
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Ties, Plastic Cable (Item 69, Appendix D)
Air tanks drained (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Rag, Wiping (Item 50, Appendix D)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Dry Cleaning Solvent (Item 65, Appendix D)
Goggles, Industrial (Item 15, Appendix C)
Solder, Tin Alloy (Item 64, Appendix D)
Gloves, Rubber (Item 13, Appendix C)
Insulation Sleeving, Electrical (Item 29.1
Soldering and Brazing Outfit, Resistance Heating
(Item 73, Appendix B)
Tape, Antiseizing (Item 66, Appendix D)
Heater, Gun Type, Electric (Item 24, Appendix B)
Tape, Insulation, Electrical (Item 68, Appendix
Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)
Screwdriver Attachment, Socket Wrench (Item 51,
Nut, Self-Locking (4) (Item 137, Appendix G)
Semiconductor Device, Diode (8) (Item 274.1,
Personnel Required
(2)
a. Removal.
NOTE
Tag hoses and connection points prior to
disconnecting.
(1) Disconnect six hoses (1) from fittings (2).
(2) Disconnect two hoses (3) from tee fitting (4).
17-137
