TM 9-2320-366-20-5
17-29. M1089 30K WINCH PNEUMATIC MANIFOLD REPLACEMENT/REPAIR (CONT)
NOTE
Remove plastic cable ties as required.
Tag wires and connection points prior to
disconnecting.
(3) Remove electrical tape from four connector splices (5).
Discard electrical tape.
(4) Cut eight wires (6) at each side of connector splices (5).
Discard connector splices.
NOTE
Step (5) requires the aid of an assistant.
(5) Remove four self-locking nuts (7), screws (8), washers
(9), and M1089 30K winch pneumatic manifold assembly
(10) from 30K winch frame (11). Discard self-locking
nuts.
b. Disassembly.
NOTE
Tag fittings and plugs prior to removal.
(1) Remove tee fitting (1) and two plugs (2) from regulating
valve (3).
(2) Remove two screws (4) from mounting brackets (5).
(3) Remove regulating valve (3) and mounting brackets (5)
from pipe nipple (6).
(4) Remove pipe nipple (6), six fittings (7), and two plugs (8)
from M1089 30K winch pneumatic manifold (9).
Change 1
