TM 9-2320-366-20-5
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools
Engine shut down (TM 9-2320-366-10-1).
Tool Kit, Genl Mech (Item 46, Appendix C)
Hydraulic reservoir supply and return valves
Pan, Drain (Item 24, Appendix C)
closed (TM 9-2320-366-10-2).
Right catwalk removed (para 14-4).
Materials/Parts
Warning and caution placards removed as required
Dispenser, Pressure Sensitive Adhesive Tape
(para 2-39).
(Item 20, Appendix D)
Wrecker control panel toggle switches removed (para 7-
Lockwasher (10) (Item 76, Appendix G)
91).
Lockwasher (18) (Item 78, Appendix G)
Nut, Clip (7) (Item 122, Appendix G)
a. Removal.
(1) Remove six screws (1), lockwashers (2), washers (3),
and cover (4) from control panel (5).
Discard
lockwashers.
(2) Remove four screws (6), lockwashers (7), washers (8),
and cover (9) from control panel (5).
Discard
lockwashers.
Change 1
