TM 9-2320-366-20-5
17-19. M1089 30K WINCH CABLE TENSIONER AIR CHAMBER REPLACEMENT (CONT)
(4) Install air chamber (2), two lockwashers (3) and nuts (4)
on winch tensioner support (5).
CAUTION
Tension arm must rest against 30K winch cable
on drum when yoke is connected. Failure to
comply may result in damage to equipment.
(5) Position screw (6), yoke (7), and self-locking nut (8) on
tensioner arm (9).
(6) Tighten self-locking nut (8) to 76-84 lb-ft (103-114 Nm).
(7) Tighten jamnut (10) to 12-24 lb-in. (1-3 N m).
(8) Connect air hose (11) to 90 degree fitting (1).
c. Adjustment.
(1) Connect STE/ICE-R adapter and snubber to pressure
regulator air hose (1).
(2) Start engine and pressurize air tanks (TM 9-2320-366-
10-1).
(3) Shut down engine (TM 9-2320-366-10-1).
(4) Perform STE/ICE-R test number 50 (TM 9-4910-571-
12&P).
(5) Turn pressure regulator adjustment knob (2) until a
reading of 65 psi is noted on STE/ICE-R.
17-84
