TM 9-2320-366-20-5
(3) Position drain pan under hydraulic hose (10).
NOTE
Plug hydraulic hose after disconnecting.
(4) Disconnect hydraulic hose (10) from back of
HYDRAULIC SYSTEM OIL SAMPLING VALVE (11).
(5) Remove nut (12) and HYDRAULIC SYSTEM OIL
SAMPLING VALVE (11) from upper control panel cover
(13).
(6) Remove two nuts (14), washers (15), screws (16),
lanyards (17), washers (18), and lockwashers (19) from
bottom control panel cover (20). Discard lockwashers.
(7) Remove three nuts (21), washers (22), screws (23),
washers (24), lockwashers (25), and bottom control
panel cover (20) from control panel (5). Discard one nut,
washer, and three lockwashers.
17-87