TM 9-2320-366-20-5
This task covers:
a. Removal
c. Adjustment
b. Installation
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Air tanks drained (TM 9-2320-366-10-1).
Wrench, Torque, 0-75 lb-in. (Item 90, Appendix
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Materials/Parts
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Lockwasher (2) (Item 97, Appendix G)
STE/ICE-R (Item 41, Appendix C)
Nut, Self-Locking (Item 136, Appendix G)
a. Removal.
NOTE
Left and right 30K winch cable tensioners
air chambers are removed the same way.
Left side shown.
(1) Disconnect air hose (1) from 90 degree fitting (2).
(2) Remove self-locking nut (3) and screw (4) from tensioner
arm (5). Discard self-locking nut.
(3) Remove two nuts (6), lockwashers (7), and air chamber
(8) from winch tensioner support (9).
Discard
