TM 9-2320-366-20-4
16-23. M1089 TOOL BOX REPLACEMENT/REPAIR (CONT)
(14) Route terminal lug TL20 (25) and right hand clearance
light connector P89 (26) through tube (27).
(15) Install terminal lug TL20 (25) on tool box (1) with
lockwasher (28) and nut (29).
(16) Connect clearance light connector P89 (26) to connector
489 (30).
NOTE
Three center electrical connectors are
removed the same.
Left hand center
connector shown. Refer to Table 16-1.
M1089 Rear Clearance Marker Light
and connectors on each marker light.
(17) Route clearance light connector 489 (31) and terminal
lug TL7 (32) through tool box (1).
(18) Install terminal lugs TL30 (33) and TL7 (32) on clearance
light (34) with lockwasher (35) and nut (36).
(19) Connect clearance light connector 489 (31) to connector
P54 (37).
(20) Perform steps (17) through (19) on remaining clearance
lights.
16-180
