TM 9-2320-366-20-4
This task covers:
a.
Tool
Box
Ladder
Removal
e. Catwalk
Ladder
Removal
b.
Tool
Box
Ladder
Disassembly
f. Catwalk
Ladder
Disassembly
c.
Tool
Box
Ladder
Assembly
g. Catwalk
Ladder
Assembly
d.
Tool
Box
Ladder
Installation
h. Catwalk
Ladder
Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Nut, Self-Locking (10) (Item 136, Appendix G)
Nut, Self-Locking (4) (Item 141, Appendix G)
Pin, Cotter (2) (Item 234, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Nut, Self-Locking (Item 139, Appendix G)
Wrench, Torque, 0-175 lb ft (Item 58,
Personnel Required
Goggles, Industrial (Item 15, Appendix C)
(2)
a. Tool Box Ladder Removal.
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
NOTE
Steps (1) through (3) require the aid of an
assistant.
(1) Remove four self-locking nuts (1), eight washers (2), and
four screws (3) from ladder support hand rail brackets (4
and 5). Discard self-locking nuts.
(2) Remove self-locking nut (6), two washers (7), screw (8),
rear ladder (9) and front ladder support hand rail bracket
(4) from vehicle. Discard self-locking nut.
