TM 9-2320-366-20-4
16-22. M1090/M1094 LADDER, BRACKETS, AND LATCH REPLACEMENT/REPAIR/
ADJUSTMENT (CONT)
f. Rear Brackets Installation.
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes. Wear safety goggles/glasses
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water and get immediate medical
attention. Failure to comply may result in
injury to personnel.
NOTE
Perform steps (1) through (7) on left rear
bracket.
(1) Apply sealing compound to threads of four screws (1)
and two screws (2).
(2) Position two wear pads (3) on rear bracket (4) with four
screws (1), washers (5), and self-locking nuts (6).
(3) Tighten four self-locking nuts (6) to 24-30 lb-in. (3 Nm).
(4) Install wear pad (7) on rear bracket (4) with two screws
(2).
(5) Apply sealing compound to threads of three screws (8).
(6) Position rear bracket (4) on vehicle with three screws (8).
(7) Tighten three screws (8) to 20-25 lb-ft (27-34 Nm).
16-162
