TM 9-2320-366-20-4
16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT)
y. M1090/M1094 Rear Fender and Bracket Removal.
NOTE
Left and right rear fenders and brackets are
removed the same way. Right side shown.
(1) Remove self-locking nut (1), washer (2), resilient mount
(3), hook (4), and washer (5) from rear fender (6).
Discard self-locking nut.
(2) Remove nut (7) from hook (4).
(3) Remove two self-locking nuts (8), washers (9), resilient
mounts (10), and screws (11) from rear fender (6).
Discard self-locking nuts.
(4) Remove two self-locking nuts (12), washers (13), screws
(14), bracket (15), and rear fender (6) from support
bracket (16). Discard self-locking nuts.
(5) Remove two self-locking nuts (17), washers (18), screws
(19), washers (20), bracket (15), and two resilient
mounts (21) from rear fender (6). Discard self-locking
nuts.
(6) Remove nut (22), washer (23), screw (24), and clamp
(25) from bracket (26).
(7) Remove two nuts (27), washers (28), screws (29), and
bracket (26) from taillight carrier (30).
16-106
