TM 9-2320-366-20-4
w. M1090 Rear Splash Guard Removal.
NOTE
Left and right rear splash guards are
removed the same way. Right side shown.
Remove three self-locking nuts (1), screws (2), plate (3),
and rear splash guard (4) from fender bracket (5).
Discard self-locking nuts.
x. M1090 Rear Splash Guard Installation.
NOTE
Left and right rear splash guards are installed
the same way. Right side shown.
(1) Position splash guard (1) and plate (2) on fender bracket
(3) with three screws (4) and self-locking nuts (5).
(2) Tighten three self-locking nuts (5) to 18-22 lb-ft (24-30
Nm).
16-105
