TM 9-2320-366-20-4
(3) Remove two self-locking nuts (10), washers (11), screws
(12), rear fender (9), and two resilient mounts (13) from
platform (3). Discard self-locking nuts.
r. M1088 Rear Fender Installation.
NOTE
Left and right rear fenders are installed the
same way. Right side shown.
(1) Position rear fender (1) on platform (2) with two resilient
mounts (3), screws (4), washers (5), and self-locking
nuts (6).
(2) Tighten two self-locking nuts (6) to 18-22 lb-ft (24-30
Nm).
(3) Position two brackets (7) on rear fender (1) with two
resilient mounts (8), screws (9), washers (10), and self-
locking nuts (11).
(4) Position two screws (12) and self-locking nuts (13) in
platform (2).
(5) Tighten self-locking nuts (11 and 13) to 18-22 lb-ft (24-
30 Nm).
16-101
