TM 9-2320-366-20-4
16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT)
(3) Position bracket (5) on mounting bracket (1) with screw
(6), washer (7), and self-locking nut (8).
(4) Tighten screw (6) to 84-108 lb-in. (10-12 Nm).
(5) Position splash guard (9) and plate (10) on bracket (5)
with washer (11), nut (12), hook (13), two screws (14),
and three self-locking nuts (15).
(6) Tighten three self-locking nuts (15) to 18-22 lb-ft (24-30
Nm).
q. M1088 Rear Fender Removal.
NOTE
Left and right rear fenders are removed the
same way. Right side shown.
(1) Remove two self-locking nuts (1) and screws (2) from
platform (3). Discard self-locking nuts.
(2) Remove two self-locking nuts (4), washers (5), resilient
mounts (6), brackets (7), and screws (8) from rear fender
(9). Discard self-locking nuts.
16-100
