TM 9-2320-366-20-4
(3) Remove two nuts (12), washers (13), resilient mounts
(14), screws (15), and bracket (16) from rear fender (11).
(4) Remove nut (17), two washers (18), and hook (19) from
rear fender (11).
(5) Remove nut (20) from hook (19).
n. M1085/M1086 Rear Fender Installation.
NOTE
Left and right rear fenders are installed the
same way. Right side shown.
(1) Install nut (1) on hook (2) to bottom of threads.
(2) Position hook (2), two washers (3), and nut (4) on rear
fender (5).
(3) Tighten nut (4) to 18-22 lb-ft (24-30 Nm).
(4) Position bracket (6) on rear fender (5) with two screws
(7), resilient mounts (8), washers (9), and nuts (10).
(5) Tighten two nuts (10) to 18-22 lb-ft (24-30 Nm).
16-97
