TM 9-2320-366-20-4
i.
M1084 Rear Fender Removal.
NOTE
Left and right rear fenders are removed the
same way. Right side shown.
Remove two screws (1), washers (2), rear fender (3), and
two resilient mounts (4) from mounting plate (5).
j.
M1084 Rear Fender Installation.
NOTE
Left and right rear fenders are installed the
same way. Right side shown.
(1) Position two resilient mounts (1) and rear fender (2) on
mounting plate (3) with two washers (4) and screws (5).
(2) Tighten two screws (5) to 38-54 lb-ft (52-72 Nm).
k. M1085/M1086 Rear Splash Guard Removal.
NOTE
Left and right rear splash guards are
removed the same way. Right side shown.
Remove three self-locking nuts (1), washers (2), screws (3),
washers (4), plate (5), and rear splash guard (6) from
brackets (7 and 8) and rear fender (9). Discard self-locking
nuts.
Change 1
16-95
