TM 9-2320-366-20-4
e. M1083/M1093 Rear Splash Guard Removal.
NOTE
Left and right rear splash guards are
removed the same way. Right side shown.
(1) Remove two nuts (1), washers (2) and screws (3) from
bracket (4).
(2) Remove nut (5), two washers (6), hook (7), plate (8), and
rear splash guard (9) from bracket (4).
(3) Remove nut (10) from hook (7).
(4) Remove two nuts (11), washers (12), bolts (13), and
bracket (4) from taillight carrier (14).
f. M1083/M1093 Rear Splash Guard Installation.
NOTE
Left and right rear splash guards are installed
the same way. Right side shown.
(1) Position bracket (1) on taillight carrier (2) with two bolts
(3), washers (4), and nuts (5).
(2) Tighten two nuts (5) to 26-32 lb-ft (35-43 Nm).
Change 1
