TM 9-2320-366-20-4
This task covers:
a. Underplate Removal
g.
Right Rear Bracket Removal
b. Underplate Installation
h.
Right Rear Bracket Installation
c. Left Front/Left Rear Bracket Removal
i.
Splash Guard Removal
d. Left Front/Left Rear Bracket Installation
j.
Splash Guard Installation
e. Right Front Bracket Removal
k.
Upper Bracket Removal
f. Right Front Bracket Installation
l.
Upper Bracket Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Nut, Self-Locking (6) (Item 134, Appendix G)
Nut, Self-Locking (3) (Item 148, Appendix G)
Lockwasher (Item 108, Appendix G)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Lockwasher (Item 109, Appendix G)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Underplate Removal.
(1) Remove three self-locking nuts (1), six washers (2),
three screws (3), and guard support (4) from underplate
(5). Discard self-locking nuts.
